System

On this screen you will find an overview of system settings that you can adjust according to your preferences. Move between individual items using arrows / .

💡 Backlight Intensity

• Sets display brightness from 0% to 100%.
• Can be adjusted in 5% steps.

Higher brightness is suitable for bright ambient light, lower brightness saves battery.

🔆 Display Backlight

Display backlight behavior settings. Three modes are available:

• Automatic – backlight turns off automatically after a certain period of inactivity.
• Manual – user controls backlight manually:
  • On/off is done by simultaneously pressing OK + buttons
• On – backlight remains permanently on.

tip

If you want to save battery, don't set On mode.

🌗 Display Mode

Here you choose which mode the display should operate in. There are 3 options:

• Day – light background with dark text, suitable for use in daylight.
• Night – dark background with light text, less glaring in the dark.

🌍 Language

Here you can choose the language of the entire device interface. Link to guide.

📏 Units

Switch between two unit systems:

• Metric – meters
• Imperial – miles

⏰ Time Zone

Allows you to set the time zone according to your geographical location.

• Range: –12 to +12 hours
• Time zone affects time display throughout the system

📶 Bluetooth

Used to connect the controller with the mobile application.

• Bluetooth must be enabled if you want to use phone connection.

💾 Format SD Card

This option is displayed only if an SD card is inserted in the device.

• "Format SD Card" button – used to completely erase data on the card
• Use only if you really want to remove all content.

WARNING

Formatting is irreversible – all data on the SD card will be permanently deleted.

🏭 Factory Settings

Restore device to default (factory) state.

• Erases all data and user settings
• Device will be in the state as when purchased

Warning

The action cannot be undone! Use only when necessary.