Training
This function allows performing corrections of unwanted behavior at distances up to 20 km. The basic DOG GPS X30/X30B set allows the use of tone (acoustic command). The DOG GPS X30T/X30TB set with training module is extended with stimulation impulse and light for dog indication in darkness using powerful LEDs.
The first button always has a permanently assigned function – it activates training tone for all collars.
The second button is exclusively for stimulation impulse.
Only the third button is optional. On X40 devices, you can choose one of the following functions: Booster, Tone, or Light.
Training buttons only work on main screens.
Training bar displays set training commands.
Once any of them is sent to the collar, the corresponding icon will briefly highlight, confirming its transmission.
Tone (acoustic signal)
All sets from the X30 and X40 series allow two types of tone:
- Training - serves as a sound command for the dog. This command can precede the stimulation impulse and is a very effective warning. It replaces a whistle, whose volume the dog perceives the same even when very distant.
- Localization - acoustic signal used to find the dog in darkness or dense vegetation. This signal is audible up to 30 m distance (X30/X30T transmitters), or up to 300 m distance (X30B/X30TB transmitters).
Stimulation Impulse
(ONLY GPS X30T/X30TB) This function allows activating collar alerts in the form of safe stimulation impulses transmitted through two contact points. The essence of stimulation impulses is not to harm the dog. The impulse is very unpleasant for the dog, so they quickly create a connection between the verbal command, acoustic signal, and the unpleasant feeling on their neck.
You set the stimulation impulse strength using arrows 
/
when the training bar is displayed.
Send an impulse from the controller by pressing the middle training button, but only if the training bar is already displayed.
If it's not displayed, the first press only activates the bar and the impulse is not sent yet. Only with the next button press is the impulse sent.
Example:
First press the left button for tone (the tone field highlights), then the middle button for impulse – in this case the impulse is sent immediately on first press.
Light
For locating the dog in darkness, the light function can be used.
Booster
The booster function allows choosing higher stimulation impulse intensity than the main stimulation impulse setting. This button is a ready option for solving extreme situations when your dog doesn't react to the standard stimulation impulse level and you need to act quickly with higher stimulation impulse intensity.
How to set training buttons?
Training button settings for individual dogs are made in the Training Settings section, which you can find in the collar settings part.
You can change the optional button directly from the training bar:
1. Display the training bar:
– by briefly pressing any training button (this will trigger a training command).
– Exception: the middle button with impulse on first press only displays the bar without sending an impulse (if the bar wasn't displayed yet).
2. Once the bar is displayed, press the OK button.
3. A menu of functions for the optional button will appear.
4. Use arrows to select the desired function and confirm with the OK button.
Training buttons only work on main screens.