Skip to main content

Device Settings

On this screen you can edit parameters of a specific paired device.

Name​

Change the device name.

Visible​

Here you determine whether the collar should be displayed on the main screens. If you have a paired collar that you left at home, you can hide it. The device remains paired but won't interfere on overview screens.

Update Interval​

Set how often the collar should send data to the controller (in seconds).

  • Shorter interval = more accurate information, but higher battery consumption
  • Longer interval = longer battery life, but less frequent updates

Notification Settings​

Here notifications for collar functions are set:

Training Settings​

Note

On this screen the training buttons work – during setup you can test everything immediately.

Light on collar:

  • Light – on/off
  • Light Mode:
    • A: Slow blinking
    • B: Fast blinking
    • C: Steady light

The following settings apply to fixed training buttons (first two from left):

  • Impulse Type – choose desired training impulse type Long / Short
  • Training Tone Pitch:
    • 1/3 – low tone
    • 2/3 – higher tone
    • 3/3 – high tone
  • Training Tone Volume – sound intensity setting in 4 levels from quiet to loud

The following setting is for the optional button (third from right):

  • Optional Button: possibility to assign a specific function to the button for the selected collar:
    • Light – lighting control
    • Booster – enhanced impulse. After confirming the selection, you can adjust its power in the range 0–20.
    • Tone – sound signals. After selecting this function you can further set:
      • Tone Type – training or localization
      • Localization Tone Pitch – levels 1–3
      • Localization Tone Volume – levels 1–4

Delete​

This option causes collar unpairing. The collar will be removed from the list of paired devices and its position will be freed.