Skip to main content

Motion Detection

Here you set how the device should alert you about changes in your dog's activity.

  • Tone – choose from 16 different tone types for audio notification
  • Notification – choose how the notification should be made:
    • Vibration
    • Sound
    • Text
      Multiple types can be combined.
  • Notify on – set which state the device should react to:
    • Motion
    • Standing still
  • Sensitivity – choose sensitivity level from 1 (very low) to 9 (high sensitivity)
  • Delay – determines how many data packets with the same state must be received in a row before the controller displays a notification. You can set the packet reception interval in Device Settings – Update Interval.
  • Repeat notification – works only for vibration or sound notifications.
    The notification will repeat as long as:
    • the collar is in the state to be notified about, or
    • you do not press any button on the controller.

Example of delay​

  • You want to receive a notification when the dog is standing still.
  • In Device Settings – Update Interval you have set 6 seconds – the collar sends data every 6 s.
  • If you set delay 2, the notification will come after the second packet when the dog is standing still.
  • If you set delay 4, the notification will come after the fourth packet when the dog is standing still.

This function is useful if you want to be sure the dog is really standing still and hasn't just stopped for a moment.